| Introduction | ||||
| Semi-rigid polyolefin double-wall heat-shrinkable tube, high shrinkage rate, flame retardant, suitable for waterproof sealing and insulation protection of automobile wiring harness wire connectors, terminals and components; length can be customized. | ||||
| Features | ||||
| Operating temperature: -40℃-130℃ | ||||
| Minimum full shrinkage temperature: 135 ℃ | ||||
| Environmental protection， ELV，RoHS compliant | ||||
| Shrink ratio: 4:1 | ||||
| Color : Black |
| Technical Data | ||||
| Property | Test Method | Value | ||
| Heat shrink tube property | ||||
| Longitudinal change rate | ASTM D2671 | ≥-10% | ||
| Tensile strength | ASTM D2671 | ≥10.3MPa | ||
| Breakdown elongation | ASTM D2671 | ≥250% | ||
| 2% secant modulus | ASTM D2671 | ≥137MPa | ||
| Heat shock(225℃/4h) | ASTM D2671 | No dripping, no flow, no cracks (outer layer) | ||
| Dynamic cutting | ASTM D3032 | ≥13.6kg | ||
| Volume resistivity | ASTM D2671 | ≥1.0×1014Ω.cm | ||
| Flame retardant(outer layer only) | ISO 6722-1 | Self-extinguishing within 30S | ||
| Joint performance | ||||
| Leakage current of the initial sample | Q/DLH 0006 | ≤0.25μA | ||
| After repeated bending at room temperature
Current leakage | Q/DLH 0006 |
≤0.25μA | ||
| After Heat shock
Current leakage | Q/DLH 0006 |
≤0.25μA | ||
| Low temperature flexibility
Withstand voltage | Q/DLH 0006
1kV×1 minute |
Previous :
Silicone Rubber, Fluorine Rubber Sheet
Next :
Rubber Compound
Masking Film, Overspray Protective Sheeting
OEM PVC Pipe Cover Plastic Vinyl Soft End Caps for Round Tubing with ROHS
Supol
Plastic Parts
Disposable Plastic Car Seat Cover for Car Wash and Car Repair
Automotive Plastic Parts
Customized Plastic Injection Parts
Floor Mat
Automotive Wire Harness Insulation Protection Heat Shrink Tubing
SEND INQUIRY×
To: Automotive Wire Harness Insulation Protection Heat Shrink Tubing
Name:
Email Address:
Address:
Phone Number:
Message:
| ||
